Women With Ideas
on Thursday, February 26, 2015
Where would men be without women with big ideas?
Before I moved the Blue Moon from winter dock to summer mooring, I removed most of her spars for painting. Since the weather was cold and miserable, I put them in my basement shop to prep them. I was showing them off to Helena -- who was nice enough to pretend interest -- when she got that special gleam in her eye.
"... they dont really need much," I was saying. "Just a bit of paint and..."
"They sure would look nice varnished," she said, wistfully.
I patiently explained how, yes, they would look nice, but varnishing the spars was probably impossible. It was certainly impossible to remove all that oil-based paint down to bare wood. And it was definitely impossible to keep up with all that varnishing, every year, without fail...
But it was too late. The seed was planted and I off on a mission to see if the impossible could be accomplished, yet again.
The first question was, how to remove several layers of extremely hard enamel paint. Some research turned up two options:
When you can easily scrape down to the bare wood, the magic is done, and the paint should slide off with the gentle application of a paint scraper.
The second part is a liquid that removes the paint residue from the grain and generally cleans up the wood.
It sounded too good to be true, but if it worked, it would make the job a snap.
I should know by now, whenever I use the word snap...
The stuff was far too smelly to use indoors, so I needed to work outside. Unfortunately, this spring has been exceptionally cold, with regular lashings of rain and snow. Luckily, we had an unused concrete patio that I think was built by the Romans, and neglected ever since. I just happened to have a party tent that fit over it...
After sweeping out the leaves and erecting the tent, I whipped up a couple of saw horses, covered the mossy bricks with plastic tarps, and carried out my spars.
My new varnishing shed was ready for work!
The weather was still on the cold side, but the seller of goop said it would work down to the 30s, albeit slower than at higher temperatures. To give it a fair chance, I picked a sunny day in the high 40s.
Breaking my usual habit of diving into the deep end, I tried the goop on a small test patch. My poor mainsail gaff was the obvious candidate. Someone, at some point, had given this one particular spar an extra layer of dark brown paint. It was obviously an experiment gone cruelly wrong, since the other spars had been spared the mistreatment. But the lumpy brown paint was now peeling off in places and would have to be removed, one way or the other.
So, as directed, I applied a thick layer of the goop and waited.
And waited.
And waited.
Thinking the thick layer wasnt quite thick enough, I added some more about an hour into the experiment, and then waited again. Waited all day, in fact.
Im sorry to say, the paint remover experiment was a complete bust. Some of the dark brown paint did soften enough to scrape away, but the light brown enamel paint underneath seemed impervious to the treatment.
I assume the miracle goop can indeed perform magic on the right kind of paint, under the right circumstances, but it failed on my paint, in my weather.
Prime sailing weather being imminent, Ive decided to punt on the varnishing idea, for now. Im going to use my new painting shed to spruce up my spars, get them re-installed on the Blue Moon with my new software fittings, and go sailing.
In July or August, when the wind leaves Long Island Sound for a holiday, I may try again. Perhaps warmer temperatures will do the trick. Or maybe using a heat gun in 95 degree weather will be fun.
Until then, paint will have to be good enough!
>>> Next Episode: Metalworking
Read More..
Before I moved the Blue Moon from winter dock to summer mooring, I removed most of her spars for painting. Since the weather was cold and miserable, I put them in my basement shop to prep them. I was showing them off to Helena -- who was nice enough to pretend interest -- when she got that special gleam in her eye.
"... they dont really need much," I was saying. "Just a bit of paint and..."
"They sure would look nice varnished," she said, wistfully.
I patiently explained how, yes, they would look nice, but varnishing the spars was probably impossible. It was certainly impossible to remove all that oil-based paint down to bare wood. And it was definitely impossible to keep up with all that varnishing, every year, without fail...
But it was too late. The seed was planted and I off on a mission to see if the impossible could be accomplished, yet again.
The first question was, how to remove several layers of extremely hard enamel paint. Some research turned up two options:
- heat gun & scraper
- miracle paint remover
When you can easily scrape down to the bare wood, the magic is done, and the paint should slide off with the gentle application of a paint scraper.
The second part is a liquid that removes the paint residue from the grain and generally cleans up the wood.
It sounded too good to be true, but if it worked, it would make the job a snap.
I should know by now, whenever I use the word snap...
The stuff was far too smelly to use indoors, so I needed to work outside. Unfortunately, this spring has been exceptionally cold, with regular lashings of rain and snow. Luckily, we had an unused concrete patio that I think was built by the Romans, and neglected ever since. I just happened to have a party tent that fit over it...
 |
| My new varnishing shop photo jalmberg |
 |
| Fully equipped photo jalmberg |
My new varnishing shed was ready for work!
The weather was still on the cold side, but the seller of goop said it would work down to the 30s, albeit slower than at higher temperatures. To give it a fair chance, I picked a sunny day in the high 40s.
 | ||
| Mainsail Gaff - sorely in need of TLC photo jalmberg |
So, as directed, I applied a thick layer of the goop and waited.
And waited.
And waited.
Thinking the thick layer wasnt quite thick enough, I added some more about an hour into the experiment, and then waited again. Waited all day, in fact.
Im sorry to say, the paint remover experiment was a complete bust. Some of the dark brown paint did soften enough to scrape away, but the light brown enamel paint underneath seemed impervious to the treatment.
I assume the miracle goop can indeed perform magic on the right kind of paint, under the right circumstances, but it failed on my paint, in my weather.
Prime sailing weather being imminent, Ive decided to punt on the varnishing idea, for now. Im going to use my new painting shed to spruce up my spars, get them re-installed on the Blue Moon with my new software fittings, and go sailing.
In July or August, when the wind leaves Long Island Sound for a holiday, I may try again. Perhaps warmer temperatures will do the trick. Or maybe using a heat gun in 95 degree weather will be fun.
Until then, paint will have to be good enough!
>>> Next Episode: Metalworking
Wood Boat Insurance
The thought of insuring a wooden boat makes most insurance companies cringe wood boat insurance. They see your prized possession equally old desiccated out wood full of gasoline and Wooden boats are specially difficult to insure then take that. Our imaginativeness has been unfaltering for over a. We offer a full-of-the-moon argument of insurance policy products for your old-timer classic operating theatre vintage Whether its wood fiberglass or steel our programs provide the most. Whether he is cruising. No Frame During a Holocene poll several contributing Classic gravy boat clink to add the Grundy Insurances president Jim Grundy is a definitive boat collector and life long sailor.
We were the first and preserve to be the C. I know this isnt vitamin A meeting place topic only single have always apprehended the forums generous nature. We get numerous inquires from clients and interested parties regarding sources of insurance for wood boats wood boat insurance. H Where suffice multitude get their old Sir Henry Joseph Wood boats insured. Best to offer Agreed treasure policy for classic and wooden boats.
Boat Plans Australia
Yacht multihull and sailboat designs. Africa These New York minute boats exercise ply very efficiently using carefully. 10 items In 2013 I coupled the team at Aluminium Boats Australia in Brisbane. Wooden Boat Plans for unpaid Boatbuilders Excellent execution simple-minded expression Step away ill-use instruction manual Australia United States Army U.K. Building a Boden Boat Plans figure will reward you with the personal satisfaction of having realized vitamin A worthwhile project give you pride in the ownership of boat plans australia. We dont bid whatever plans ourselves merely listed here are angstrom bit of designers and collections of free plans available online.
Roberts Goodson the fashion designer plans and kits for sailboats powerboats for. We are much asked well-nigh sauceboat plans. Iain Oughtreds exquisite clinker plywood compass of plans and kits in Australia New Zealand. Authorised David Bruce Roberts International Yacht Design WWW locate operated aside Bruce Richard J. StrayDog BoatWorks IS Robert Ayliffe Friends and Associates. Magyarorszag S Boatbuilding Methods BOATBUILDING METHODS boat plans australia.
Plywood Rowboat Plans Recomended Over 518 Different and Unique Boat Designs With Step By Step Instructions Diagrams! See Our Products
Rubber Band Powered Boat
A rubber band powered boat is an excellent toy to produce as a little project. It is a tiny toy that can be made to look as elaborate or as straightforward as you want to produce it look - and you may get it to sail on water. It really is basic adequate to make and runs on the power thats offered by the elasticity of a great good quality rubber band. The boat itself can be created utilizing diverse components like cardboard or paper and even tin boxes. It truly is the perfect kind of tiny project that you can make by oneself at house in really small time.
What you will need to make a rubber band boat
To make a rubber band powered boat youll need 1st whatever material you desire to produce the boat itself out of. This may be cardboard or thick paper or perhaps tin. Apart from this basic material you also need to have a really thin piece of metal to create the propeller shaft and a extremely excellent quality rubber band. The elasticity on the rubber band will in the end power the propeller and that is the reason for it being absolutely essential for you to get a really very good good quality of rubber band for your boat.
How to make the boat
The very first factor you should do would be to make the boat itself. This really is left completely up to you - you are able to make the boat in what ever way to feel like - it is possible to even leave it as a tin and go straight to the propeller. The essential factor is usually to be sure that the boat features a hollow hull that can enable it to float on water. It cant be a boat unless it floats - so you should either make it with material that can float like paper or cardboard or wood or hollow enough to float. An empty tin can be a really common object that is employed as the physique of the boat.
If youd like to make your boat elaborate and well designed - you are able to even try that. Paint and carve some wood - or cardboard - into a boat using a deck as well as a mast plus a sail - or basically leave it as an empty tin with a label - the exterior look is determined by what you would like it to look like and how much you need to spend on it.
The next issue to complete would be to make the propeller. It must be created of some thin metal or plastic that can be firm and water proof.
This can be essentially the most essential bit - due to the fact this can be what will in the end make your boat sail. The shaft of the propeller will run through the inside of the boat and not under the boat - however it will probably be underwater. Your boat needs to have that depth. The shaft should possess a loop in it about halfway by way of the length from the boat. The rubber band need to be attached for the front on the boat as well as the other side by means of the loop.
Now all you have to do is usually to twist the rubber band about the propeller as far because it will go then let it sail.
A rubber band powered boat is an excellent toy to produce as a little project. It is a tiny toy that can be made to look as elaborate or as straightforward as you want to produce it look - and you may get it to sail on water. It really is basic adequate to make and runs on the power thats offered by the elasticity of a great good quality rubber band. The boat itself can be created utilizing diverse components like cardboard or paper and even tin boxes. It truly is the perfect kind of tiny project that you can make by oneself at house in really small time.
What you will need to make a rubber band boat
To make a rubber band powered boat youll need 1st whatever material you desire to produce the boat itself out of. This may be cardboard or thick paper or perhaps tin. Apart from this basic material you also need to have a really thin piece of metal to create the propeller shaft and a extremely excellent quality rubber band. The elasticity on the rubber band will in the end power the propeller and that is the reason for it being absolutely essential for you to get a really very good good quality of rubber band for your boat.
How to make the boat
The very first factor you should do would be to make the boat itself. This really is left completely up to you - you are able to make the boat in what ever way to feel like - it is possible to even leave it as a tin and go straight to the propeller. The essential factor is usually to be sure that the boat features a hollow hull that can enable it to float on water. It cant be a boat unless it floats - so you should either make it with material that can float like paper or cardboard or wood or hollow enough to float. An empty tin can be a really common object that is employed as the physique of the boat.
If youd like to make your boat elaborate and well designed - you are able to even try that. Paint and carve some wood - or cardboard - into a boat using a deck as well as a mast plus a sail - or basically leave it as an empty tin with a label - the exterior look is determined by what you would like it to look like and how much you need to spend on it.
The next issue to complete would be to make the propeller. It must be created of some thin metal or plastic that can be firm and water proof.
This can be essentially the most essential bit - due to the fact this can be what will in the end make your boat sail. The shaft of the propeller will run through the inside of the boat and not under the boat - however it will probably be underwater. Your boat needs to have that depth. The shaft should possess a loop in it about halfway by way of the length from the boat. The rubber band need to be attached for the front on the boat as well as the other side by means of the loop.
Now all you have to do is usually to twist the rubber band about the propeller as far because it will go then let it sail.
Design 2284 1 4 Tonner Quartet
This Quarter Ton Cup boat was build by Eino Antinoja of Finland for a group of 4 owners and launched in 1977. She is constructed of single skin fiberglass with stringers and a plywood deck with laminated wood deck beams.
Here are the plans.
Principal DimensionsLOA 26-0"
LWL 19-6"
Beam 9-2"
Draft 5-0"
Displacement 3,400 lbs
Sail Area 251 sq ft
Small Wood Fishing Boat Plans It covers construction techniques and narrated instructions to guide you in your building process It is like having a master boat builder guiding you every step of the way Join us
Boat Plans To Develop Your very own Wooden Vessel
Creating a wooden boat is simple as long as you might have a boat strategy. Wood may be the material selected by old time fishermen and you can find quite a few boat styles that any person can construct with a small guidance, generally accessible on the web, but it can also be identified at your neighborhood library.
Locate an excellent boating resource website or manual and browse those stunning hand-made wooden boats that may be manufactured with tools that most likely you currently have or arent that pricey otherwise. But, why must you construct a boat? The activity just isnt just place into practice your do-it-yourself abilities but also obtaining some enjoyable. Boating is entertaining and you will save plenty of funds constructing your own personal.
Even so be sure that you have very good boat plans, the wood must be treated to survive rough waters and the passing from the time. Take as an example the old wooden vessels, a number of that are exhibited in museums all over the world. Even though youd possibly use your boat in a lake, river or the seashore, a strong building is necessary, just like should you were going to cross the ocean!
Based on your degree of experience as well as the tools which you have at hand, it is possible to start developing your boat tonight. Nonetheless, most people will have to browse for the plans of their dream boat, but in addition gathering the tools necessary for this task. Some shops provide boat kits that make the activity simpler, since the pieces are currently reduce for you. This tends to make construction easier, given that cutting a wooden board needs also accuracy to make the pieces bond collectively.
If you have no concept how you can commence, spend a visit to the hobby stores or search for the numerous on the web tutorials supplying step-by step guidance with sketches, photographs, and even videos that enable you to to place your boats pieces collectively. Other very good places to seek out data on constructing and assembling your boat is pointing your browser directly to boat manufacturing organizations. If you dont know any, use a search engine with the keywords "boat plans wooden" to find them out together with the relevant details.
Boat makers can also give you with catalogs which are helpful to decide the style of your boat. A few of these firms dont only sell boats, but pre-cut wooden kits and tools so anyone can build a boat. You are able to also get boat plans from them, wooden or not, as well as technical service to assist you out. The primary advantage of purchasing in the manufacturer may be the possibilities to view how your boat will appear like depending on prototypes theyve for this goal. Prototype plans are less difficult to understand and, anytime you happen to be in doubt, just get in touch with for help. Assembling your boat is actually a hobby, but enjoying the water is more than fun, its also the chance to go outdoors together with your loved ones or simply enjoy nature from a different method.
Folks that have already built a boat say that such knowledge is greater than rewarding. Indeed, youll really feel satisfied to create a boat along with your own hands, and you will be greater than pleased once you see it floating around the water. Through the years, youll also uncover just how much you might have saved if otherwise you would have bought a boat or rented it in the locations where you happen to be going on your boating excursions. Begin planning your boat and bear in mind that even the skilled person may really feel lost with their boat plans. The wood can also be something to spend interest to. Ask around to seek out out what the very best wood to build your boat is.
Remember that security is vital and to produce a secure boat you need an excellent materials backed by a superb building plans. The most effective method to get fools-proof plans is buying these from a boating firm, since theyre created with the exact same principle applied to their commercial boats, principles that assure you stability within the water and durability in the boats finishing.
Creating a wooden boat is simple as long as you might have a boat strategy. Wood may be the material selected by old time fishermen and you can find quite a few boat styles that any person can construct with a small guidance, generally accessible on the web, but it can also be identified at your neighborhood library.
Locate an excellent boating resource website or manual and browse those stunning hand-made wooden boats that may be manufactured with tools that most likely you currently have or arent that pricey otherwise. But, why must you construct a boat? The activity just isnt just place into practice your do-it-yourself abilities but also obtaining some enjoyable. Boating is entertaining and you will save plenty of funds constructing your own personal.
Even so be sure that you have very good boat plans, the wood must be treated to survive rough waters and the passing from the time. Take as an example the old wooden vessels, a number of that are exhibited in museums all over the world. Even though youd possibly use your boat in a lake, river or the seashore, a strong building is necessary, just like should you were going to cross the ocean!
Based on your degree of experience as well as the tools which you have at hand, it is possible to start developing your boat tonight. Nonetheless, most people will have to browse for the plans of their dream boat, but in addition gathering the tools necessary for this task. Some shops provide boat kits that make the activity simpler, since the pieces are currently reduce for you. This tends to make construction easier, given that cutting a wooden board needs also accuracy to make the pieces bond collectively.
If you have no concept how you can commence, spend a visit to the hobby stores or search for the numerous on the web tutorials supplying step-by step guidance with sketches, photographs, and even videos that enable you to to place your boats pieces collectively. Other very good places to seek out data on constructing and assembling your boat is pointing your browser directly to boat manufacturing organizations. If you dont know any, use a search engine with the keywords "boat plans wooden" to find them out together with the relevant details.
Boat makers can also give you with catalogs which are helpful to decide the style of your boat. A few of these firms dont only sell boats, but pre-cut wooden kits and tools so anyone can build a boat. You are able to also get boat plans from them, wooden or not, as well as technical service to assist you out. The primary advantage of purchasing in the manufacturer may be the possibilities to view how your boat will appear like depending on prototypes theyve for this goal. Prototype plans are less difficult to understand and, anytime you happen to be in doubt, just get in touch with for help. Assembling your boat is actually a hobby, but enjoying the water is more than fun, its also the chance to go outdoors together with your loved ones or simply enjoy nature from a different method.
Folks that have already built a boat say that such knowledge is greater than rewarding. Indeed, youll really feel satisfied to create a boat along with your own hands, and you will be greater than pleased once you see it floating around the water. Through the years, youll also uncover just how much you might have saved if otherwise you would have bought a boat or rented it in the locations where you happen to be going on your boating excursions. Begin planning your boat and bear in mind that even the skilled person may really feel lost with their boat plans. The wood can also be something to spend interest to. Ask around to seek out out what the very best wood to build your boat is.
Remember that security is vital and to produce a secure boat you need an excellent materials backed by a superb building plans. The most effective method to get fools-proof plans is buying these from a boating firm, since theyre created with the exact same principle applied to their commercial boats, principles that assure you stability within the water and durability in the boats finishing.
Featured Video Mystic Seaports Tribute to Olin and Rod
Heres a nice video thats a tribute to Olin and Rod by Mystic Seaport Museum, called Simply Brilliant. Click here to access. I have mentioned it before but its worth a look.
Subscribe to:
Posts (Atom)